UC2854N .

产品概述

The UC2854N is a High Power Factor Preregulator provides active power factor correction for power systems that otherwise would draw non-sinusoidal current from sinusoidal power lines. This device implements all the control functions necessary to build a power supply capable of optimally using available power-line current while minimizing line-current distortion. To do this, it contains a voltage amplifier, an analog multiplier/divider, a current amplifier and a fixed-frequency PWM. In addition, it contains a power MOSFET compatible gate driver, 7.5V reference, line anticipator, load-enable comparator, low-supply detector and over-current comparator. It uses average current-mode control to accomplish fixed-frequency current control with stability and low distortion. Unlike peak current-mode, average current control accurately maintains sinusoidal line current without slope compensation and with minimal response to noise transients.

• Control boost PWM to 0.99 Power factor
• Limit line current distortion to <5%
• World-wide operation without switches
• Feed-forward line regulation
• Average current-mode control
• Low noise sensitivity
• Low start-up supply current
• Fixed-frequency PWM drive
• Low-offset analog multiplier/divider
• 1A Totem-pole gate driver

• Precision voltage reference
• Green product and no Sb/Br

应用

电源管理