TPS92511DDA

产品概述

The TPS92511DDA is a 30W Anode Capable Constant Current Buck LED Driver for driving a single LED string with current up to 0.5A and efficiency up to 95%. Only 5 external components are required for basic operation and single layer PCB layout is feasible because of the integration of an N-MOSFET, no external current sensing resistor, no external compensation and the proper terminal assignment. A high-value external resistor programs the LED current so that fine tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50 to 500kHz. EMI design becomes easier as a result of constant switching frequency. By adding simple external circuits, the device can handle applications with even higher input voltages. It applies a floating buck topology with a low-side N-channel power MOSFET, which does not need boot-strapping capacitor.

• Requires no external current sensing resistor
• Requires no external loop compensation
• Ease of use, needs minimum 5 components
• 1000:1 Contrast ratio feasible
• Single layer PCB feasible
• Can work as high voltage buck regulator
• Can work as linear current shunt regulator
• Integrated low-side N-channel MOSFET
• LED current programmable up to 0.5A
• Typically ±3.6% LED current accuracy

• Switching frequency programmable from 50 to 500kHz
• Current limit protection
• VCC under-voltage lock-out
• Thermal shutdown protection
• Support analogue dimming and thermal foldback
• Green product and no Sb/Br

应用

发光二极管照明, 照明, 车用