NCP1251CSN65T1G

产品概述

The NCP1251CSN65T1G is a current-mode Pulse Width Modulation (PWM) Controller for off-line power supplies. It is capable of delivering a rugged and high performance offline power supply. With a supply range up to 28V, the controller hosts a jittered 65 or 100kHz switching circuitry operated in peak current-mode control. When the power on the secondary side starts to decrease, the controller automatically folds back its switching frequency down to a minimum level of 26kHz. As the power further goes down, the part enters skip cycle while limiting the peak current. Over power protection (OPP) is a difficult exercise especially when no-load standby requirements drive the converter specifications. The ON proprietary integrated OPP lets you harness the maximum delivered power without affecting your standby performance simply via two external resistors. A latched Over Voltage Protection (OVP) is combined on the same pin. For ease of implementation, a latched OVP also monitors the VCC line.

• Internal ramp compensation
• Internal fixed 4ms soft-start
• 100ms Timer-based auto-recovery short-circuit protection
• Frequency jittering in normal and frequency foldback modes
• Option for auto-recovery or latched short-circuit protection
• OVP Input for improved robustness
• Latched OVP protection on VCC
• Less than 100mW Standby power at high line
• EPS 2.0 Compliant

应用

消费电子产品, 计算机和计算机周边, 电源管理, 通信与网络