产品概述
The MAX706TESA+T is a +3V voltage monitoring low cost microprocessor (µP) supervisory circuit in 8 pin NSOIC package. This supervisory circuit reduces the complexity and number of components required to monitor +3V power supply levels in +3V to +5V µP systems. It significantly improves system reliability and accuracy compared to separate ICs or discrete components. This device provides reset output during power-up, power-down and brown-out conditions. An independent watchdog output will goes low if watchdog input has not been toggled within 1.6s. The MAX706T provides 1.25V threshold detector for power fail warning, low battery detection or for monitoring power supply other than main supply. It also provides active-low manual reset input. This device is used in computers, controllers, intelligent instruments, critical µP power monitoring and battery powered equipments.
- Supply voltage range from 1.2V to 5.5V
- Operating temperature range from -40°C to 85°C
- Active-low, push-pull reset output signal
- Reset threshold of 3.08V and reset time delay of 200ms
- Debounced TTL/CMOS compatible manual reset input
- Quiescent current of 100µA
- Watchdog timeout period of 1.6s at VCC = 3.3V
- Supply current of 90µA at VCC < 3.6V
应用
系统监控, 便携式器材
产品信息
- :
- 3.08V
- :
- 1监控器/监视器
- :
- 1.2V
- :
- 5.5V
- :
- 有功－低/推拉
- :
- NSOIC
- :
- 8引脚
- :
- 200ms
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -