产品概述
The MCP130T-460I/TT is a Supervisor Circuit with active-low open-drain output. The voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. It will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.
- Holds microcontroller in reset until supply voltage reaches stable operating level
- Resets microcontroller during power loss
- RESET to VCC=1V
- Accuracy of ±125mV for 5V systems and ±75mV for 3V systems over-temperature
- 45µA Typical operating current
- 5kR Internal pull-up resistor
应用
计算机和计算机周边
产品信息
- :
- 4.6V
- :
- 1监控器/监视器
- :
- 1V
- :
- 5.5V
- :
- 有功－低
- :
- SOT-23
- :
- 3引脚
- :
- 350ms
- :
- -40°C
- :
- 85°C
- :
- -
- :
- AEC-Q100
- :
- MSL 1 -无限制