产品概述
The OPA564AIDWP is a high-current Operational Amplifier ideal for driving up to 1.5A into reactive loads. The high slew rate provides 1.3MHz full-power bandwidth and excellent linearity. This monolithic integrated circuit provides high reliability in demanding powerline communication applications. At maximum output current, a wide output swing provides a 20VPP (IOUT=1.5A) capability with a nominal 24V supply. The OPA564 is internally protected against over-temperature conditions and current overloads. It is designed to provide an accurate, user-selected current limit. Two flag outputs are provided - one indicates current limit and the second shows a thermal over-temperature condition. It also has an enable/shutdown pin that can be forced low to shut down the output, effectively disconnecting the load.
- Fully protected - Thermal shutdown and adjustable current limit
- Output enable/shutdown control
- Diode for junction temperature monitoring
- High speed - 1.3MHz full-power bandwidth at 10VPP
- 10µV/°C Typical offset drift
- 90dB Typical CMRR
- Green product and no Sb/Br
应用
通信与网络, 信号处理, 音频, 电源管理, 测试与测量
产品信息
- :
- 1个放大器
- :
- 17MHz
- :
- 40V/µs
- :
- ± 3.5V 至 ± 12V
- :
- SOIC
- :
- 20引脚
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 2 - 1年